An in-home plumbing system is something that can be taken for granted but is one of the modern convenience miracles that makes our lives much easier. In the grand scheme of things, it was not that long ago that most homes did not have indoor plumbing. However, with this amenity may come some trouble as well. All homeowners will tell you that eventually things go wrong or need to be replaced in the house. Included in this list is plumbing. Therefore, having a basic understanding of your home plumbing system will help you take care of small problems and know when a certified plumber needs to be called in. Henrik Plumbing can help you with any of your pipe and plumbing needs.
How the Home Plumbing System Works
The plumbing system is made up of two exclusive parts: getting water in the house and flushing the water out of the house. The first step is called the water supply system. This is responsible for delivering fresh water to a sink, shower, dishwasher, washing machine, or toilet. Although the installation can be complicated, the theory behind it is not. A series of pipes are used to take water from a private well or municipal water source to multiple locations in your house. Because the water will be working against gravity, these pipes will use pressure to get the water where it needs to go. The second part is the drain waste vent system. This system is responsible for flushing the used water from the appliances and fixtures. A different set of pipes called the drain waste pipes, send the dirty water to the sewer or septic tanks. This waste removal system is assisted by the vent system. Without the vent system, the drainpipe would not have the proper pressure to drain. It also helps ventilate any sewage gases caught in the pipe, so your house doesn’t smell like the sewer.
Why you Should Understand how it Works
Although the concept of plumbing is simple, the actual system is not just water in, water out. The plumbing system in every building is very complex and hard to reach. This translates to a lot of time and money if anything goes wrong. Understanding how the system works will help you mitigate any instances that could cost time or money. Knowing the things that signify a properly working plumbing system compared to a broken one will allow you to catch any problems quickly. The faster you catch a problem, the less collateral damage will take place.
What to do if you Suspect a Plumbing Problem
The water being delivered to your house will typically be sent through a meter that registers how much you use. There should be a main shutoff valve near this meter that will stop the flow of water. This is your first step so that more damage does not occur. Failing to shut off the water valve in a timely matter may result in flooding of the whole house. Most individual fixtures have their own shutoff valve too. If you know for certain it is a specific toilet or sink that is causing the trouble, you can just shut off that appliance.
What Signifies a Problem with the System?
The biggest symptom of a broken system is clogging. If you have slow draining sinks or tubs, you probably have a block in the drainage system. This is usually an easy fix with a snake or drain solution. Another sign to look for is the pressure of the water. Low or high pressure could signify something is not quite right. If a pipe is leaking, you will notice a wet spot collecting. Periodically check the floors and ceilings for any watermarks. Whatever the problem is, don’t wait to get it fixed! Henrik Plumbing has the experience and expertise you are looking for in a plumber.